Measurement Sheet in cm for Configurator Medium Waist

(1) Half Waist

(2) Rise: (Outseam – Inseam – 1cm) = Rise

(3) Upper Leg: Put the trousers flat on the table. Reverse one leg and take the measure at the level of the stitching where the two sides of the trousers meet.

(4) Half Bottom: Measure 10cm from the actual end of the leg.

(5) Inseam

(6) Outseam: Measure without the waistband.


For any doubt about measure and how to check it please contact us via info@rotasrl.com and we will explain how to check them.

Please note a possible difference of +/- 1cm due to the fact that we produce every pair of trousers one by one.

Size Rise (2) Half waist (1) Upper Leg (3) Half bottom (4) Inseam (5) Outseam (6)
44 19 39 31.5 18.3 94 114
46 19.5 41 32.5 18.5 94 114.5
47 19.7 42 33 18.7 94 114.7
48 20 43 33.5 18.8 94 115
49 20.2 44 34 18.9 94 115.2
50 20.5 45 34.5 19 94 115.5
51 20.7 46.3 35 19.1 94 115.7
52 21 47.5 35.5 19.3 94 116
53 21.2 48.5 36.2 19.4 94 116.2
54 21.5 49.5 37 19.5 94 116.5
56 22 51.5 38 19.8 94 117
58 22.5 53.5 39 20 94 117.5
60 23 55.5 40 20.3 94 118
62 23.5 58.5 41.5 20.5 94 118.4


Please notice: If you are in between of two sizes we suggest you size up! In this way you are able to make an alteration with your local tailor.