Measurement Sheet in cm Model Besp
Please note a possible difference of +/- 1cm due to the fact that we produce every pair of trousers one by one.
| Model BESP | Half waist (1) | Rise (2) | Upper leg (3) | Half bottom (4) | Inseam (5) | Outseam (6) |
|---|---|---|---|---|---|---|
| 48 | 43 | 20 | 29.5 | 15.5 | 92 | 112 |
| 50 | 45 | 20 | 30.5 | 16 | 92 | 112 |
| 52 | 47 | 20 | 31.5 | 16 | 93 | 113 |
| 54 | 49 | 20 | 32.5 | 16.5 | 93 | 113 |
| 56 | 51 | 21 | 34 | 17 | 93 | 114 |
| 58 | 53 | 21 | 35.5 | 17 | 92 | 113 |
Please notice: If you are in between of two sizes we suggest you size up! In this way you are able to make an alteration with your local tailor.
(1) Half Waist
(2) Rise: (Outseam – Inseam – 1cm) = Rise
(3) Upper Leg: Put the trousers flat on the table. Reverse one leg and take the measure at the level of the stitching where the two sides of the trousers meet.
(4) Half Bottom: Measure 10cm from the actual end of the leg.
(5) Inseam
(6) Outseam: Measure without the waistband.
For any doubt about measure and how to check it please contact us via info@rotasrl.com and we will explain how to check them.