Measurement Sheet in cm for Configurator High Waist

(1) Half Waist

(2) Rise: (Outseam – Inseam – 1cm) = Rise

(3) Upper Leg: Put the trousers flat on the table. Reverse one leg and take the measure at the level of the stitching where the two sides of the trousers meet.

(4) Half Bottom: Measure 10cm from the actual end of the leg.

(5) Inseam

(6) Outseam: Measure without the waistband.


For any doubt about measure and how to check it please contact us via info@rotasrl.com and we will explain how to check them.

COMFORT LEG:

All our regular trousers come with the "regular leg“, but you can choose as an option our "comfort leg“. 
When you prefer a wider leg shape please choose our "comfort leg“ option in the configurator; in this way the measurement of the trousers’ leg, respect to the measure of the size chart, becomes +1.5cm wider starting from the upper leg and it becomes to be +2cm wider at the half bottom.

Please note a possible difference of +/- 1cm due to the fact that we produce every pair of trousers one by one.

Size Rise (2) Half waist (1) Upper Leg (3) Half bottom (4) Inseam (5) Outseam (6)
44

20.5

38.5 30.5 18.3 94 115.5
46 21 40.5 32 18.5 94 116
47 21.2 41.5 32.5 18.7 94 116.2
48 21.5 42.5 33 18.8 94 116.5
49 21.7 43.5 33.5 18.9 94 116.7
50 22 44.5 34 19 94 117
51 22.2 45.5 34.5 19.1 94 117.2
52 22.5 47 35 19.3 94 117.5
53 22.7 48 35.5 19.4 94 118
54 23 49 36 19.5 94 118
56 23.5 51 37 19.8 94 118.5
58 24 53 38 20 94 119
60 24.5 55 39.5 20.3 94 119.5
62 24.5 58 40.5 20.5 94 120


Please notice: If you are in between of two sizes we suggest you size up! In this way you are able to make an alteration with your local tailor.